Login:    Help
Login:    Help
Find a product:  

5 AMP LINEAR CHARGER

 OEM-0024054

24 VOLT - 5 AMP: Fully Automatic two-stage battery charger, UL / CSA approved. Dual Mode (for gel/sealed and wet batteries) specially designed for Industrial and OEM applications such as Mobility aids, scooters and electric bicycles among others.

Product Specifications


Rating:
Output:25 Volts / 5 Amps DC

  GEL WET LEAD ACID
Set Voltage (cut-off): 28.6 +/- 0.2 29.9 +/-0.2
Float Voltage (come-on): 27.2 +/- 0.2 28.8 +/-0.2 Volt

Input:105 VAC – 120 VAC ; 60 Hz

Packaging/Master Carton:
Dimensions:6 1/2" wide x 11" high x 4 1/4" deep (approx.)
16.5cm x 28cm x 11cm deep (approx.)
Weight:9 lbs.; 4.09kg

Features


FULL 3 LED DISPLAY: Indicators display the battery’s condition. The red light indicates that the charger has a 120 volts AC supply present. The yellow light indicates the proper connection to the battery and combined with the red light indicates the charger is charging. The green light indicates a full charge. Lights alternate when approaching full charge. This prevents overcharging as the battery reaches its full capacity.
PROTECTION: The charger has electronic protection against reverse polarity and short circuits. In overload conditions, protection is provided by a re-settable bimetallic circuit breaker.
CHARGING CAPABILITIES: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery’s condition. The charging sequence is determined by the condition of the battery and is fully interactive.
BATTERY RECOVERY:(deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed.
NO RISK OF SHOCK: Our charger case is made from advanced engineering plastic. A grounding pin is not required and hence our input connector has only two pins (we have an international standards approval on this model).

Contact us (click here for our contact information)